Basic Info
Heat Resistance
High Temperature
Application
Plastic, Metal, Rubber, Wood
Base Material
Fiberglass Material
Type
Water Hardening Pipe Repair Bandage
Pressure Resistance
up to 8 MPa
Specification
2/3/4/5/6 Inch
Product Description
Emergency Pipe Plumbing Repair Water Leakage Stop Tape Rapid Repair Permanent Sealing Wrap with 18G putty and Self fusing silicone tape
Repair Bandage is a pre-impregnated fiberglass bandage with a knitted non-woven fiberglass structure, providing maximum strength for repairs on corner joints, elbows, and other shaped fittings.
Repair Kit is packaged in a heat-sealed bag. Each bag includes: a Pipe Repair Bandage inside a foil pouch; a 90mm (3.5") Steel Putty inside a plastic tube; and a pair of long gloves.
Detailed Photos
Epoxy Putty offers a quick and easy solution for creating watertight seals around leaking faucets and repairing cracks and holes in pipes. It is recommended to use other sealing products to replace the putty for specific needs.
Product Parameters
| Product Name |
Size/Product |
Accessories/Kit |
Color |
| Water activated polyurethane resin repair tape |
50MM X 3.6M; 50MM X 1.8M |
1. 57g/28g epoxy putty 2. Glove 3. Silicone tape |
White, Green, Red, Yellow, Blue, Black |
| Wrap seal repair bandage |
75MM X 3.6M; 75MM X 2.7M |
| Pipe Wrapping Tape |
100MM X 3.6M to 100MM X 15M |
| Water Activated Pipe Repair Bandage |
125MM X 3.6M; 125MM X 4.5M |
Product Features
- Repairs leak in 30 minutes
- Applicable to pipes up to 18" (457 mm) diameter
- Applicable on any metal or non-metal pipes
- Repairs T-joint, elbow joint, valve thread, valve body
- Withstand pressure up to 10 Mpa (Min 12 layers)
- Withstand temperature up to 200 °C (392 °F)
- Safe for drinking water and resistant to most chemicals
- Permanent repair and extended service life
Installation Instructions
1
Identify leaking area and shut down pipes immediately.
2
Clean and roughen the pipe surface.
3
Put on enclosed latex gloves.
4
Apply Steel Putty to the leak site and mould.
5
Immerse bandage in fresh water for 10 seconds.
6
Apply around damaged area extending 50mm on either side.
7
Wrap quickly as curing begins once removed from water.
8
Pull each layer tightly and squeeze together.
Application
Exhibition
Packaging & Shipping
Frequently Asked Questions
Q: How long does the repair process take to complete?
A: The bandage begins to cure immediately upon contact with water and will provide a permanent repair within approximately 30 minutes.
Q: What maximum pressure can the repair bandage withstand?
A: When applied correctly with at least 12 layers, it can withstand pressures up to 10 MPa.
Q: Can this tape be used on wet or submerged pipes?
A: Yes, it is water-activated. However, for best results during application, the flow should be stopped using the provided putty or silicone tape first.
Q: Is the product safe for household drinking water pipes?
A: Yes, the materials used are safe for drinking water applications once fully cured.
Q: What is the temperature resistance of the cured bandage?
A: The cured repair wrap can withstand temperatures up to 200 °C (392 °F).
Q: Does it work on irregular shapes like T-joints and elbows?
A: Yes, the knitted fiberglass structure is designed to be flexible and conform easily to elbows, T-joints, and other shaped fittings.